Anthony P Gabriel, Age 80Beach Park, IL

4221924, Sep 9, 1980

May 25, 1978

5/909384

Anthony P. Gabriel - Staten Island NY
John D. Lawler - Mt. Pleasant Village NJ

General Cable Corporation - Greenwich CT

H02G 1504

174 10

This invention provides relatively simple and inexpensive end seals for protecting the ends of telephone cables that are preconnectorized at the factory or distribution center. These end seals are moisture-proof, able to retain pressure and afford mechanical protection while the preconnectorized cables are carried in inventory and during handling to a place of use in the field.

RE31277, Jun 14, 1983

Aug 21, 1981

6/295126

Anthony P. Gabriel - Staten Island NY
Jimmy Justiss - Bonham TX

General Cable Corporation

H01B 1106

174 36

Communication cables with cores that have groups of conductor pairs, that carry messages in opposite directions, in the same cable present the problem of crosstalk between the different groups. With the increase in carrier frequency that is used for communication, the crosstalk problem increases, and cables that were acceptable for lower frequency are no longer adequate. This invention provides more efficient shielding; is suitable for higher frequencies; provides a stronger cable structure; and reduces corrosion of the shielding.

4165442, Aug 21, 1979

Jun 12, 1978

5/914505

Anthony P. Gabriel - Staten Island NY
Jimmy Justiss - Bonham TX

General Cable Corporation - Greenwich CT

H01B 1106

174 36

Communication cables with cores that have groups of conductor pairs, that carry messages in opposite directions, in the same cable present the problem of crosstalk between the different groups. With the increase in carrier frequency that is used for communication, the crosstalk problem increases, and cables that were acceptable for lower frequency are no longer adequate. This invention provides more efficient shielding; is suitable for higher frequencies; provides a stronger cable structure; and reduces corrosion of the shielding.

3968321, Jul 6, 1976

Oct 3, 1973

5/403016

Jerzy Adam Olszewski - Edison NJ
Anthony P. Gabriel - Staten Island NY

General Cable Corporation - New York NY

H01B 1104

174 36

The telephone communication cable of this specification has a metal shield formed by bending a sheet of metal at one or both edges so that the portions of the sheet that are folded over one another form a shield of double thickness and the shield has one or both of its edges formed by a continuous extent of folded metal instead of a square edge or fluted edge with a burr along the side of the edge toward which the slitting instrument advanced to make the cut. Air spaces are prevented by filling any clearance between the folded areas of the shield with adhesive. The shield is applied as a D-Screen with the edges off the original strip on the curved part of the D-Screen and away from the group of pairs that are shielded by the D-Screen.